RobotPoweredHome is reader-supported. When you buy through links on my blog, I may earn an affiliate commission. As an Amazon Associate, I earn from qualifying purchases.
I had my sister come over to my house for the night as we had planned just to chill and watch movies.
When everything was ready, and we were about to start the movie, the TV wouldn’t turn on.
I noticed that the remote was blinking its red LED light.
I have been using this Samsung TV for a few years and have always had a superb watching experience.
This was the first time that I saw my remote flashing red lights.
The first thing that I thought of was to search on the internet, and apparently, this issue is pretty widespread.
See how I managed to get my Samsung remote’s red light to stop blinking and how you can do so too.
To fix a blinking red light on a Samsung TV remote, pair the remote to the TV again, and if that doesn’t work, restart the TV and pair the remote once again.
Why Is Samsung TV Remote Blinking Red Light?
There are several possible explanations for why your Samsung remote is flashing red light.
In most cases, it is not because of an internal issue with the remote and can be fixed quickly.
When you push a button on your Samsung remote control and a red LED light shows, this indicates that the remote isn’t paired with the TV.
The LED will continue to flicker as long as the problem persists, and it will not turn off until you fix it.
This communication problem between the TV and remote might be caused by several factors, such as:
- Faulty or weak batteries.
- Corrosion buildup on the battery contacts.
- The connection between TV and remote.
Most of these problems can be quickly resolved and don’t require an expert to get them fixed.
Replace Remote Batteries
The most basic and straightforward solution whenever you suspect a problem with your remote control is to change the batteries.
I have seen online that, in most cases, that the culprit is just the batteries since, over time, batteries become worn out and need to be replaced.
Remove the old batteries from the battery compartment and check that the battery contacts are not dirty or damaged before installing the new batteries.
Use the markings on the inside of the compartment to correctly position the batteries before slotting them in.
After you’ve changed the batteries, check to see if the remote is still blinking red.
Ensure The Battery Contacts Are Not Rusty
As batteries wear out and corrode, the contacts on the remote control may also get dusty and rusted.
If the battery contacts are corroded or damaged at any point, this might prevent the remote from doing its job well.
Make sure that the battery contacts are cleaned every six months.
To clean the contacts, gently wipe the contacts using a clean cloth and isopropyl alcohol.
I wouldn’t recommend using water because it could shorten the contacts.
Re-pair The Remote To The TV
Sometimes the remote is just not correctly paired to the TV, leading us to believe it is broken or damaged.
If the remote control is flashing red light, this could be one of the primary reasons why.
You can get the red light to stop blinking by unpairing the remote from the TV and pairing it back again.
To re-pair your remote to the TV, follow the steps below:
- Turn on your Samsung TV using the power button on the TV itself or using a remote application.
- While the remote is pointed directly at the remote control sensor on your TV, press the Return and Play/Pause buttons on your remote for a few seconds.
- Wait for the pairing process to be completed.
- When pairing is successful, a remote and a battery icon will appear on the screen.
Your remote should be working fine after the pairing. Check if the blinking light still exists.
Factory Reset The TV
When you have tried all the solutions mentioned above, and nothing else works, you can try to factory reset your TV.
Upon resetting, your TV will be restored to its default settings and set up as if it were brand new.
All changes made, such as application downloads and saved passwords before the reset, will be removed.
Here are the steps for resetting your Samsung TV:
- Go to the TV’s Settings.
- Then, select General.
- Click on Reset and enter your PIN. The default PIN is 0000. Use your own PIN if you have one set.
- Upon factory resetting, restart your TV.
When the TV turns on, use the remote and check if the red light starts blinking again.
Contact Support
If, after trying the solutions mentioned above, the issue is still not resolved, you can go to Samsung’s Support page for more information and assistance.
You can enter your device’s model number on the search bar to see the support articles that may help you with this issue.
Additionally, you can call their customer support hotline for a faster response.
Either way, Samsung sees that they’ll be able to come up with a better working solution or offer alternatives.
Replace The Remote
If you have reached out to Samsung Customer Support and, unfortunately, the issue continues, then it is possible that your remote is damaged and needs a replacement.
Our remote controls are always subject to food and drink spills and are even thrown around accidentally.
While the remote control normally looks fine on the outside, inside components might wear out over time and need to be replaced.
Replacing the remote control with another Samsung remote might seem to be the best course of action.
It can be purchased online, where you can find great replacement remotes that are one-to-one copies of Samsung’s remote.
Alternatively, you can purchase a universal remote, like the SofaBaton U1, which can not only control your TV but can talk to your receiver, Blu-ray player, and more.
Final Thoughts
Your Samsung TV’s remote isn’t that complicated of a device, and as a result, any issues that it can come across, like the red light we saw here, can be fixed quite quickly.
I seriously recommend checking out a universal remote if you want to get your TV’s remote replaced.
They are insanely convenient, and after I started using one, all my other remotes haven’t even been touched since.
Since I don’t have to juggle 50 different remotes for all my devices in my entertainment area, enjoying my time with my TV has been much more convenient.
You May Also Enjoy Reading
- Can You Turn On Samsung TV Without Remote? Here’s How!
- Using iPhone As A Remote For Samsung TV: detailed guide
- What To Do If I Lose My Samsung TV Remote?: Complete Guide
- Samsung TV Turns On By Itself: Here’s How I Fixed It
- How To Reset Sound On Samsung TV In Seconds
Frequently Asked Questions
Why is my Samsung remote blinking red and not working?
The most probable reason your Samsung remote is flashing red light is that it is no longer paired to your TV.
You can pair the TV to the remote again and if it doesn’t stay paired, replace the remote.
How do I resync my Samsung remote?
To sync the remote to your device, point the remote directly at the remote control sensor on the TV and then press and hold the Return and Play/Pause buttons alternately for a few seconds.
A message will then show up saying that the remote is now connected to your TV.
Why is my TV not responding to my remote?
Low batteries, an obstruction between the TV and the remote, and a damaged remote are all common causes of your TV not responding to the remote.
Get the batteries replaced, clear any obstructions around the TV, or replace your remote if it is damaged.
