Midea Countertop Dishwasher Problems: 7 Common Issues (Must Know) - ApplianceChat.com (2024)

Life is so much simpler with a Midea countertop dishwasher!

Dishwashers, like all machines, can malfunction, leaving you with a frustrating feeling and a pile of dirty dishes.

Before you give up and start handwashing your dishes, read this article.

Ready, let’s dive in

Midea Countertop Dishwasher Not Draining

Is your Midea countertop dishwasher completely empty, or is there always an inch of water in the bottom?

Midea countertop dishwasher not draining is likely to be caused by a clogged-up filter, blocked hose, or faulty pump.

Before you call a repair service, try these three simple fixes if your dishwasher won’t drain.

But before you do any of these best to remove the bottom rack, spray arm support, and plug from the dishwasher’s power source.

Possible Solution(s):

Dirty Filters

  • If filters are not cleaned regularly, they can become clogged. Locate and uninstall your filters. These are located at the bottom of the dishwasher, directly beneath the lower spray arm.
  • To begin, twist the cylindrical filter to remove it from the dishwasher. Remove any gunk from the filters by gently cleaning them.

Household Plumbing or Drain Valve Problems

  • The next potential reason why your dishwasher isn’t draining is a clogged drain hose or hose with a kink, if cleaning your filters hasn’t fixed the problem.
There’s a Kink in the Hose
  • Remove the drain hose’s kink. Clear any impediments that are putting pressure on it and straighten it out.
The Drain Hose is Squashed

Remove any barriers that are pressuring it. It will be necessary to remove and replace the hose if it is seriously damaged.

The Drain Hose is Clogged
  • To release and remove the obstruction, use a wire hanger. The drain hose should be disconnected in order to accomplish this. You can use this to remove any blockages from the hose’s ends.

Kitchen Drain Is Blocked

Remembering that Countertop dishwasher drains into the kitchen plumbing and if its blocked it will prevent your Countertop dishwasher from draining.

Simply turn on the faucets to check whether the water drains out of the sink to determine if your kitchen pipes are clogged.

If water drains aways, then it’s likely to be an issue with the drain pump (see steps below).

If the water does not drain away, means you have a blockage in the kitchen pipes.

Follow the steps below to unblock your kitchen pipes

  1. Hot water should be poured into the sink until it is about halfway full, sealing the drain in place.
  2. Place the plunger over the drain and start quickly pumping up and down multiple times.
  3. Wait to see if the water drains after removing the plunger.
  4. Continue until the water drains freely.

If you have unblocked your kitchen sink and your countertop dishwasher still not draining, then move onto the next step.

Faulty Drain Pump

  • Countertop dishwashers have a pump that forces water from the tub into the drain. The pump won’t function properly if it is blocked with debris or food scraps.
  • A drain pump, like a dishwasher filter, can become clogged by leftover food particles and grease build-up.
  • This will keep the water from draining after a washing cycle. Any debris that has made its way into the pump is usually found near the impeller (a rotor that increases the pressure and flow of fluid).
  • Foreign objects, such as broken glass, can easily enter the drain pump and prevent it from functioning. If there is a problem, you should be able to hear the pump struggling.
  • Checking the drain pump generally requires access to the dishwasher’s bottom. This means disconnecting the inlet hose and removing the base plate.
  • To ensure that the pump is working properly, take a resistance reading with a multimeter.

If you are unsure about any of these tasks or do not want to risk voiding your appliance’s warranty, contact local repair centre or agent to take a look.

Midea Countertop Dishwasher Not Cleaning Properly

If your Midea countertop dishwasher isn’t cleaning your dishes, there may be too many dishes, a clogged spray arm, a broken soap dispenser, low-quality detergent being used, or a broken or malfunctioning inlet valve.

Before you call your local technician, go through the steps outlined below.

Possible Solution(s):

Spray Arm

  • Check the spray arm to ensure it has not been obstructed by a plate or utensil. Gently spin it around to see if it’s free of any impediments.
  • Check that the small holes that spray water are not clogged with grease and grime. If so, take it out and gently clean it with detergent.

Low-Grade Detergent

  • Are you using the cheapest detergent tablets from the supermarket? Spotty dishes can be caused by using low-quality or ineffective detergent.
  • Too much detergent can also cause issues. Use the proper type of detergent and the appropriate amount. A final rinse agent should also help with results.
  • Consider installing a water softener if you have hard water to reduce mineral deposit damage. Finally, make certain that the dishwasher is properly loaded.
  • Check to see if the detergent is being released by the soap dispenser.
  • Sometimes the dispenser gets stuck releasing the detergent at the correct cycle time, which is usually caused by grease and grime.
  • If this is the case, clean the soap dispenser gently with warm water to remove the grease and grime.

Dirty Filter

  • A clogged filter is a common cause of your dishwasher failing to drain making your dishes dirty.
  • If your filter is dirty and the water is not draining, remove it from the machine (as directed by the owner’s manual) and thoroughly rinse it under hot water.
  • If there is any stuck-on gunk, soak it in hot, soapy water for a few minutes before gently cleaning it with a soft brush and rinsing.

Inlet Valve

  • Water enters the dishwasher through the inlet valve. The valve is responsible for the water to enter the dishwasher, and if it malfunctions, the dishes won’t get enough water to get clean.
  • A faulty inlet valve is most likely to blame if you’ve recently noticed a hammering sound coming from the unit while it’s running.
  • Parts and replacement information can be found in your owner’s manual. Another reason can be a broken water pump belt worn out by continuous usage.

If you are unsure about any of these tasks or do not want to risk voiding your appliance’s warranty, contact a qualified plumbing technician to repair your dishwasher.

Still having problems, best to contact a qualified repair technican

Connect with an Appliance RepairTechnician
Click here to use the chatbox to speak with one of our skilled Technicians.
No in-home service calls. No appointments.

Midea Countertop Dishwasher Leaking

Midea dishwasher leaking from the bottom is usually caused by using the incorrect type and quantity of detergent, a clogged filter, overloading the machine, leaking detergent draws, or leaking hoses.

Possible Solution(s):

Damaged Door Seal

  • One of the most common causes of dishwasher leaks is a damaged seal along the edge of the appliance’s door.
  • When new and supple, its rubber material works well to keep water inside the machine—but after years of use, it can dry out, become brittle, and crack.
  • Dried foods can also accumulate along the gasket edge, preventing the door from closing securely against the frame.
  • Replace the door seal and clean it around the door and door seal. Replace the door if damaged or faulty.

Incorrectly Stacked Dishwasher

  • Overcrowded or incorrectly loaded appliances, utensils, and dishes may obstruct the arm’s rotation or cause it to become dislodged, even damaged, after years of use, resulting in leaks.
  • The solution is to stack the dishwasher correctly and check the spray arm for blockages.

Blocked, Loose, or Damaged Connecting Hose

  • The drain hose transports water from the dishwasher to the drain pump, and drain line, and eventually out your sink drain.
  • Because connections can become loose or the hose itself can crack or tear, the dishwasher may leak water onto the floor before it exits through the end of the line.
  • Check the hoses for any blockages and make sure there are no holes or cracks. If the hose is damaged, have it replaced.
  • Make sure you place the hose back in its place as per the manual. Incorrect placement will result in dishwasher malfunction.
  • Run the dishwasher through a cycle and check for any leaks.

If you’ve tried everything above and your dishwasher is still leaking, it’s time to call a technician.

Check out this article for more information on diagnosing and repairing a leaking dishwasher:

  • 7 Common Reasons Dishwasher is Leaking (with fixes)

Midea Countertop Dishwasher Buttons Not Working

If the buttons on your Countertop Midea dishwasher are not working, the display may be defective or power supply issue.

If some of the buttons are working and others aren’t the keypad may also be the culprit of your troubles.

Additionally, there is also a chance the entire control board has suffered internal damage and needs replacement.

Possible Solution(s):

  • First, ensure that your washing machine is receiving an uninterrupted power supply by ensuring that the power cable is properly plugged in and the socket works.
  • Check that child lock is not enabled and there is no food impeding the buttons.
  • Replace the faulty display, touchpad, or keypad.

Midea’s Countertop Dishwasher Won’t Start

If your Midea countertop dishwasher does not start when you turn it on, there could be a problem with the power supply or the door latch.

The switch indicates to the control board whether the door is fully closed or not so the dishwasher can start.

If the switch is faulty, the control board will not receive the signal, and the machine will not turn on.

Another possible issue can be a blown thermal fuse.

However, before you call your local technician, try the troubleshooting steps listed below.

Possible Solution(s):

Check Power Supply

  • Ensure the power cable is plugged in properly and the socket works.Check if the circuit breaker has been tripped due to a power surge and flip it back on.

Child Lock

  • Most dishwashers have a child lock feature that prevents children from opening the appliance or changing the cycle settings.
  • In many cases, the unit will not operate if the child lock is activated. The lock is usually activated and deactivated by pressing and holding a button for three seconds, or something similar.
  • Check the manufacturer’s instructions for the child safety lock if your dishwasher won’t start or the door won’t open.

Door Latch

  • The door latch switch is the next thing to inspect. This is what tells the dishwasher that the door is securely closed and that it is safe to begin the water cycle.
  • The latch secures the door, and the latch switch detects when the door is closed.

There are several possibilities here.

  • Examine the door latch to see if there is any old soap or food gunk stuck in it. The latch will not click shut if it is jammed or clogged with old gunk. The switch will not activate, and the dishwasher will not start.
  • Your door latch or latch switch could also be damaged. If the latch fails, the door will no longer be able to click and hold itself closed, preventing the dishwasher from starting and running safely.
  • You’ll need to replace the door latch as well as possibly the switch.

If you have troubleshot the items above and your dishwasher is still not working, might be faced with a faulty control board, drive motor, or Thermal Fuse.

It is best to call a technician, who will quickly determine the problem.

Connect with an Appliance RepairTechnician
Click here to use the chatbox to speak with one of our skilled Technicians.
No in-home service calls. No appointments.

Midea Countertop Dishwasher Stopping Mid Cycle

After finishing dinner, you turn on the countertop dishwasher only to discover that it stops midway through the cycle, leaving the dishes still unclean and covered in soap build up.

Then when you try to start the cycle again and get no response or find that the same mid-cycle premature end happens all over again,

The reason for your Midea countertop dishwasher stopping mid-cycle is likely caused by a faulty door switch, blown fuse, or faulty control board.

If you are uncomfortable about resolving this problem or do not want to risk voiding your appliance’s warranty, contact a qualified technician to repair your dishwasher.

Midea Countertop Dishwasher Making Noise

Strange noises coming from a countertop dishwasher are not uncommon. They are usually nothing to be concerned about, and the noise problem is often easily resolved.

If your Midea countertop dishwasher is making too much noise, it could be due to a clogged spray arm, food, or broken items in the dishwasher.

Follow the steps below before calling a technician and handwashing your dishes.

Possible Solution(s):

  • Abuzzing noise is usually nothing to be concerned about. When your countertop dishwasher pushes water down the drain, you can hear it buzz. Check your pump impeller for blockage or damage if the sound is very loud.
  • If your countertop dishwasher is making grinding noises, a foreign object has likely become lodged inside the pump. It could be hard food or something that was being cleaned and broken during the wash cycle. To see if this is the case, remove the dishwasher’s lower rack, then the spray arms, and finally the filter unit for inspection.
  • Check that the countertop dishwasher is properly loaded. If the spray arm is hitting the utensils (baby bottles, for example), the dishwasher has been incorrectly loaded. To fix this, arrange the utensils so that the spray arms can fully rotate without being obstructed.

If the noise persists, it is best to contact a technician.

Connect with an Appliance RepairTechnician
Click here to use the chatbox to speak with one of our skilled Technicians.
No in-home service calls. No appointments.

Midea Countertop Dishwasher Lifespan

Midea countertop dishwashers typically have a lifespan of 10 to 12 years.

However, depending on how much you use it and how well you maintain it, the lifespan of your dishwasher can vary.

So, to extend the life of your dishwasher, keep it in good condition by stacking it correctly and taking care of it at all times.

Midea Countertop Dishwashers Any Good?

Yes, Midea is very good. Midea countertop dishwashers are small, compact, and simple to assemble.

It can be placed on any kitchen bench or, if preferred, built into a kitchen cabinet to help you with all of your dishwashing tasks.

So, yes, it is safe to say Midea countertop dishwashers are good.

What the Reviews Say

This is a great little dishwasher.

Easy installation, no plumbing, works right out of the box.

You can fill it with water using the jug and just lay the water outlet hose in your sink.

Very good at cleaning, lots of cycles to choose from. Wouldn’t recommend it for pots but very effective for cutlery, dishes and glasses.

Online from Kogan. Hasn’t missed a beat, touch wood.

Source: www.productreview.com.au

Conclusion

If you need an affordable, well-designed sleek looking countertop dishwasher Midea is the brand to go with.

However, you may encounter some difficulties, hopefully later rather than sooner.

In that case, the solutions listed above will come in handy.

So, keep them in mind at all times and your Midea dishwasher will be in good working order.

Related Articles

  • Midea Mini Fridge Not Cooling: 7 Common Problems (with solutions)
  • Midea Fridge Problems: 7 Common Issues (Must Know)
  • Midea Dishwasher Problems: 7 Common Issues (Must Know)

References

Midea Countertop Dishwasher Problems: 7 Common Issues (Must Know) - ApplianceChat.com (2024)

FAQs

How do you reset a Midea dishwasher? ›

To reset the dishwasher, follow the instructions below: 1. Open the door a little to stop the dishwasher, after the spray arm stop working, you can open the door completely. 2. Press Program button more than three seconds the machine will be in stand by state.

How to fix E4 error on Midea dishwasher? ›

Lastly, the E4 error code usually indicates a problem with the overflow sensor. This can be resolved by checking for any blockages in the sensor and ensuring it is functioning properly.

Why isn't my Midea dishwasher draining? ›

A dirty filter is the most likely culprit when standing water remains after the cycle completes. The filter screen can easily get clogged with food particles and block the flow of water. If that happens, your dishwasher won't drain fully, and your dishes won't get completely clean.

What button do I push to reset my dishwasher? ›

To reset a dishwasher, you need to hold the start button down for three seconds or, failing that, switch your dishwasher off at the main power supply. If that won't sort out the glitch, you may have problems with your power, water source, door latch, or internal issues.

What is E7 error on Midea? ›

E7 indicates an outdoor ambient temperature sensor error. 1Eb indicates a water side heat exchanger anti-freezing temperature sensor 1 error.

Why is my Midea dishwasher beeping on an E4? ›

E4 indicates a water outlet temperature sensor error. 1E5 indicates an air side heat exchanger refrigerant outlet temperature sensor T3A error.

Why does my Midea dishwasher keep blinking? ›

There are a few potential causes for a Midea dishwasher to flash the delicate light. One possibility is that the delicate cycle is currently in progress, and the light is flashing to indicate that it is still running. In this case, you should wait for the cycle to finish before attempting to reset the dishwasher.

How do I force my dishwasher to drain? ›

You can typically activate your dishwasher's drainage function by holding the cancel button for around three seconds or the time indicated on your model. Once the dishwasher stops running, the water should drain if it's working correctly.

Why won't my dishwasher drain or dry? ›

The most likely cause of dishwasher drainage concerns is a dirty filter. Tough food particles like popcorn kernels or wet chunks of paper from container labels can get caught in the filter and keep water from draining out of your dishwasher. Make sure the overflowing isn't caused by using dish soap in the dishwasher.

How to reset midea dishwasher mdt24h3ast? ›

You will also have to resett the fault so power off/on the unit. If the light blinks when you turn it on, Press and hold the start button for 6 seconds or so with the door open. Find the combination of off/on buttons to press to reset the machine in the user manual.

What is the most common part to fail on a dishwasher? ›

The most common problem with a dishwasher is a lack of water flow or a clogged drain. This can be caused by blockages in the line, a faulty water inlet valve, or a broken pump motor.

Is it worth it to fix a dishwasher? ›

If your dishwasher is within the five-year limit, it's definitely worth fixing. But if your dishwasher is closer to ten years, finding replacement parts might be too expensive, so you'd be better off replacing your machine.

Can I fix my dishwasher myself? ›

Homeowners can fix several dishwasher malfunctions and save on professional repair costs. You can troubleshoot and address problems like malfunctioning door latches, ineffective switches and unresponsive controls by making adjustments or replacements yourself.

How do you reset a Midea dishwasher stuck on delicate? ›

Turn off the dishwasher: Unplug the dishwasher or turn off the power at the circuit breaker. Wait for a few minutes: Allow the dishwasher to cool down for a few minutes before attempting to reset it. Turn the dishwasher back on: Plug the dishwasher back in or turn the power back on at the circuit breaker.

How to reset Midea dishwasher mdt24h3ast? ›

You will also have to resett the fault so power off/on the unit. If the light blinks when you turn it on, Press and hold the start button for 6 seconds or so with the door open. Find the combination of off/on buttons to press to reset the machine in the user manual.

Why is my dishwasher not responding? ›

The usual culprits are misalignment of the machine, a latch dirty with food, soap, and grime, a dishwasher rack sticking out, a micro switch in the latch is faulty, problems with the mechanical hinges or springs on the door, or the gasket seal is failing. Check each of these components.

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Neely Ledner

Last Updated:

Views: 6099

Rating: 4.1 / 5 (42 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Neely Ledner

Birthday: 1998-06-09

Address: 443 Barrows Terrace, New Jodyberg, CO 57462-5329

Phone: +2433516856029

Job: Central Legal Facilitator

Hobby: Backpacking, Jogging, Magic, Driving, Macrame, Embroidery, Foraging

Introduction: My name is Neely Ledner, I am a bright, determined, beautiful, adventurous, adventurous, spotless, calm person who loves writing and wants to share my knowledge and understanding with you.